rage 3 blade broadheads ?

[firstnten33]

anybody ever use the rage 3 bladers went to dicks for some two bladers they were out so i bought the threes any one have any problems with them looks like a lot of moving parts and thats not good with anything any feeback would be great thanks

[Bullseye]

They work great if you hit the vital zone. haven't had any problems with them.
Not good if you are stalking deer ,
blades have a tendency to pop loose from
the o-ring if they hit brush or a twig.

[Backyard Buck]

The worst broadhead I ever bought. I have a video that came with broadheads my uncle bought and it shows them blowing apart blades bending not very many pass throughs. Very weak.

[Bullseye]

I re-used 2 broadheads & arrows after shooting deer with them, with no problems. One passed through 2 ribs. Needed to resharpen/ didn't bend. I guess I got lucky.

[PhilCVG]

I've shot two of my three of my 100 grain Rage 3 blades and one cleaned up ok, while the other was bent.

I will say they do open up very easily, whether it be putting them in or taking them out of your quiver or bumping twigs, you constantly have to check to make sure the blades are seated against the o-rings when you nock them.

[urban assault]

shoot 3 blade 100 grain rage switch from muzzys exceptional broadhead shot 3 deer this year with them and it look like i poured a 5 gallon paint can out for a blood trail entrance and exit holes unbeliveable

[firstnten33]

thats good to hear i hunt after work so most of my tracking will be in the evening so im going to need a good blood trail i have already bought them so im going to give them a chance thanks for the input guys